Restaurations Directes

Composites

Admira Fusion 5

Matériau d'obturation ORMOCER nanohybride, avec système de teintes simplifié
  • Product Icon1
  • Product Icon2
  • 83 % w/w
    Product Icon12
  • I-V
    Product Icon10
  • 310 %
    Product Icon14
  • 10 sec
    Product Icon6
  • 1,25
    Product Icon11
  • 5
    Product Icon16
Material composition
Both the fillers and the resin matrix of this product are based purely on silicon dioxide.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

AlignerFlow LC

Composite fluorescent pour les taquets d'aligneurs
  • Product Icon2
  • Product Icon22
  • 83 % w/w
    Product Icon12
  • 10 sec
    Product Icon6
  • 3
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Material application
This product is available in the non-run, non-drip, NDT syringe.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Number of colours
This product is available in the number of shades indicated.
Product information

VisCalor bulk

Composite de restauration bulk thermovisqueux
VisCalor bulk
  • Product Icon38
  • Product Icon2
  • 83 % w/w
    Product Icon12
  • I, II, V
    Product Icon10
  • Product Icon46
  • 10-20
    Product Icon6
  • 1.4%
    Product Icon11
  • 4 mm
    Product Icon15
  • 4
    Product Icon16
Application of the material
When heated, the viscosity of this material changes, thus uniting the respective advantages of flowable and sculptable materials. Specifically designed to be heated for use.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Number of colours
This product is available in the number of shades indicated.
Product information

Admira Fusion

Matériau d’obturation ORMOCER nanohybride, universel
Admira Fusion
  • Product Icon1
  • Product Icon2
  • 84 % w/w
    Product Icon12
  • I - V
    Product Icon10
  • 300%
    Product Icon14
  • 20 - 40 sec
    Product Icon6
  • 1.25 %
    Product Icon11
  • 18
    Product Icon16
Material composition
Both the fillers and the resin matrix of this product are based purely on silicon dioxide.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

Admira Fusion Flow

Matériau d’obturation ORMOCER nanohybride, fluide et photopolymérisable
Admira Fusion Flow
  • Product Icon1
  • Product Icon2
  • 74 % w/w
    Product Icon12
  • III - V
    Product Icon10
  • Product Icon46
  • 240 %
    Product Icon14
  • 20 - 40 sec
    Product Icon6
  • 2.75 %
    Product Icon11
  • 12
    Product Icon16
Material composition
Both the fillers and the resin matrix of this product are based purely on silicon dioxide.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

Admira Fusion x-tra

Matériau d’obturation ORMOCER nanohybride, 4 mm
Admira Fusion x-tra
  • Product Icon1
  • Product Icon2
  • 84 % w/w
    Product Icon12
  • I,II,V
    Product Icon10
  • 300%
    Product Icon14
  • 20 sec
    Product Icon6
  • 1.25 %
    Product Icon11
  • 4 mm
    Product Icon15
Material composition
Both the fillers and the resin matrix of this product are based purely on silicon dioxide.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Product information

Admira Fusion x-base

Matériau de base d’obturation ORMOCER nanohybride, fluide, 4 mm
Admira Fusion x-base
  • Product Icon1
  • Product Icon2
  • 72 % w/w
    Product Icon12
  • I,III,V
    Product Icon10
  • Product Icon46
  • 250 %
    Product Icon14
  • 20 sec
    Product Icon6
  • 2.5 %
    Product Icon11
  • 4 mm
    Product Icon15
Material composition
Both the fillers and the resin matrix of this product are based purely on silicon dioxide.
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Product information

Admira Flow

Matériau d’obturation fluide et photopolymérisable à base d’ORMOCER
Admira Flow
  • 63 % w/w
    Product Icon12
  • III-IV
    Product Icon10
  • 200 %
    Product Icon14
  • 40 sec
    Product Icon6
  • 2,9%
    Product Icon11
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Product information

x-tra base

Composite de base fluide et photopolymérisable
x-tra base
  • Product Icon22
  • 75 % w/w
    Product Icon12
  • I,III,V
    Product Icon10
  • 350 %
    Product Icon14
  • Product Icon46
  • 10 sec
    Product Icon6
  • 2.6 %
    Product Icon11
  • 4 mm
    Product Icon15
  • 2
    Product Icon16
Material application
This product is available in the non-run, non-drip, NDT syringe.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Number of colours
This product is available in the number of shades indicated.
Product information

x-tra fil

Matériau d’obturation photopolymérisable pour les dents postérieures
x-tra fil
  • 86 % w/w
    Product Icon12
  • I - II
    Product Icon10
  • 330 %
    Product Icon14
  • 10 sec
    Product Icon6
  • 1.7 %
    Product Icon11
  • 4 mm
    Product Icon15
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Product information

GrandioSO

Matériau d’obturation nanohybride antéro-postérieur
GrandioSO
  • Product Icon2
  • 89 % w/w
    Product Icon12
  • I - V
    Product Icon10
  • 320 %
    Product Icon14
  • 10 - 20 sec
    Product Icon6
  • 1.6 %
    Product Icon11
  • 17
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

GrandioSO x-tra

Matériau de restauration bulk nanohybride et esthétique
GrandioSO x-tra
  • Product Icon2
  • 86 % w/w
    Product Icon12
  • I,II,V
    Product Icon10
  • 420%
    Product Icon14
  • 10-20 sec
    Product Icon6
  • 1,4%
    Product Icon11
  • 4 mm
    Product Icon15
  • 4
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Material processing
This material is suitable for so-called bulk-fill restorations with a maximum layer thickness of 4 mm. For more detailed information, please consult the instructions for use.
Number of colours
This product is available in the number of shades indicated.
Product information

GrandioSO Light Flow

Composite nanohybride à faible viscosité pour les applications filigranes
GrandioSO Light Flow
  • Product Icon2
  • Product Icon22
  • 76% w/w
    Product Icon12
  • III-V
    Product Icon10
  • Product Icon46
  • 20-40 sec
    Product Icon6
  • 8
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Material application
This product is available in the non-run, non-drip, NDT syringe.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Number of colours
This product is available in the number of shades indicated.
Product information

GrandioSO Flow

Matériau d’obturation nanohybride antéro-postérieur, fluide
GrandioSO Flow
  • Product Icon2
  • Product Icon22
  • 81 % w/w
    Product Icon12
  • I - V
    Product Icon10
  • Product Icon46
  • 250 %
    Product Icon14
  • 20 - 40 sec
    Product Icon6
  • 3.2 %
    Product Icon11
  • 13
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Material application
This product is available in the non-run, non-drip, NDT syringe.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

GrandioSO Heavy Flow

Matériau d’obturation nanohybride antéro-postérieur, fluide à viscosité élevée
GrandioSO Heavy Flow
  • Product Icon2
  • Product Icon22
  • 83 % w/w
    Product Icon12
  • I - V
    Product Icon10
  • Product Icon46
  • 260 %
    Product Icon14
  • 20-40 sec
    Product Icon6
  • 3 %
    Product Icon11
  • 13
    Product Icon16
Material composition
This product is based on nanohybrid technology.
Material application
This product is available in the non-run, non-drip, NDT syringe.
Filler content
This product has a defined filler content, which is indicated in percent by weight.
Indications
This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
Radiopacity
On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
Material curing
This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
Volume shrinkage
This product is subject to the indicated volume shrinkage during curing.
Number of colours
This product is available in the number of shades indicated.
Product information

GrandTEC

Bandes en fibres de verre, imprégnées de résine, photopolymérisables, pour l’utilisation dans la technique adhésive dentinaire
GrandTEC
    Product information

    Grandio

    Matériau d’obturation nanohybride antéro-postérieur
    Grandio
    • Product Icon2
    • 87 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • 250 %
      Product Icon14
    • 20 sec
      Product Icon6
    • 1.6 %
      Product Icon11
    • 16
      Product Icon16
    Material composition
    This product is based on nanohybrid technology.
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Number of colours
    This product is available in the number of shades indicated.
    Product information

    Grandio Flow

    Matériau d’obturation nanohybride antéro-postérieur, fluide
    Grandio Flow
    • Product Icon2
    • Product Icon22
    • 80 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • Product Icon46
    • 200 %
      Product Icon14
    • 20 sec
      Product Icon6
    • 3.2 %
      Product Icon11
    • 12
      Product Icon16
    Material composition
    This product is based on nanohybrid technology.
    Material application
    This product is available in the non-run, non-drip, NDT syringe.
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Number of colours
    This product is available in the number of shades indicated.
    Product information

    Amaris · Amaris Flow

    Matériau d’obturation photopolymérisable esthétique
    Amaris Flow
    • 80 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • 10 - 40 sec
      Product Icon6
    • 2 %
      Product Icon11
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Product information

    Amaris Gingiva

    Matériau d’obturation photopolymérisable esthétique en teintes gingivales
    Amaris Gingiva
    • 80 % w/w
      Product Icon12
    • V
      Product Icon10
    • 40 sec
      Product Icon6
    • 2 %
      Product Icon11
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Product information

    FinalTouch

    Matériau de caractérisation photopolymérisable
    FinalTouch
    • Product Icon22
    • 20 sec
      Product Icon6
    • 5
      Product Icon16
    Material application
    This product is available in the non-run, non-drip, NDT syringe.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Number of colours
    This product is available in the number of shades indicated.
    Product information

    Arabesk Top

    Composite microhybride photopolymérisable pour obturations
    Arabesk Top
    • 77 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • 220 %
      Product Icon14
    • 40 sec
      Product Icon6
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Product information

    Arabesk

    Composite microhybride photopolymérisable avec système à charges VOCO Sintraglas
    Arabesk
    • 77 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • 200 %
      Product Icon14
    • 40 sec
      Product Icon6
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Product information

    Arabesk Flow

    Composite fluide microhybride photopolymérisable à base de céramique de verre pour obturations
    Arabesk Flow
    • 64 % w/w
      Product Icon12
    • III - V
      Product Icon10
    • 200 %
      Product Icon14
    • 40 sec
      Product Icon6
    • 3,5
      Product Icon11
    • 3
      Product Icon16
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Number of colours
    This product is available in the number of shades indicated.
    Product information

    Polofil Supra

    Composite microhybride photopolymérisable pour obturations
    Polofil Supra
    • 77 % w/w
      Product Icon12
    • I - V
      Product Icon10
    • 200 %
      Product Icon14
    • 40 sec
      Product Icon6
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Product information

    Alfacomp LC

    Matériau pour obturations et reconstitutions des postérieures, photopolymérisable
    Alfacomp LC
    • 86 % w/w
      Product Icon12
    • I - II
      Product Icon10
    • 330 %
      Product Icon14
    • 10 sec
      Product Icon6
    • 1.7%
      Product Icon11
    Filler content
    This product has a defined filler content, which is indicated in percent by weight.
    Indications
    This product is suitable for filling the specified classes of cavity in accordance with the indications. For more detailed information, please consult the instructions for use.
    Radiopacity
    On completion of the working process, this product is highly radiopaque. The value shown indicates the radiopacity as percentage aluminium equivalent.
    Material curing
    This product cures by the application of light. The stated time is an average figure. For more detailed information, please consult the instructions for use.
    Volume shrinkage
    This product is subject to the indicated volume shrinkage during curing.
    Product information